Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Has anyone got this bug with firmware 7.5.7?
https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvc22026
Basically, the phone is stuck without being registered and you cannot use the web interface.
The known affected release was 7.6.2 and it's been fi...
Has anyone had any success with the Dual registration option in Cisco phones?
I'm using a Cisco SPA514G. The phone boots and register to the first proxy and alternate proxy.
I shut down my main proxy, and the light is still green indicating that it'...
We are using SPA514G (firmware 7.5.7) and we have notice that DTMF are not recognized properly by Asterisk when using the speakerphone.
DTMF is set to auto on the Cisco side and RFC4733 in Asterisk. Asterisk will sometimes not read the DTMF correctl...
Hi,
Is there any way for the SPA514 to not pick the first line after lifting the handset?
We have for exemple 3 registered line on a phone and each line belong to a different user.
We want to force users to pick their own line before placing a call ...
Hi, We are using Asterisk with Cisco SPA514G latest firmware and I have noticed long delays when doing attended transfer calls.Blind transfers are working fine, and I have tested the attended transfer with 2 other phone brand, and I do not get delay...
Here's what I have found out about that famous transfer key missing.
The phone must have 2 lines to make it work and the following must be set:
<Line_ID_Mapping group="Phone/Miscellaneous_Line_Key_Settings">Vertical First</Line_ID_Mapping>
<Line_Nav...
Hi,
By doing some tests I have found that you have to set the following value:
<Line_ID_Mapping group="Phone/Miscellaneous_Line_Key_Settings">Vertical First</Line_ID_Mapping>
<Line_Navigation group="Phone/Miscellaneous_Line_Key_Settings">Per Call</Li...
Blind transfer are working fine on my side with the setting to no.
I can get SIP dialog for the transferor and the asterisk side, would that be enough?