Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Good morning. I am having some trouble setting up a new ASA 5505. I finished the config and before I put the ASA into production I decided to run the packet tracer on the ASDM. the test packets seemed to pass fine through my ACLs however keep gett...
I have a problem that makes no sense. I have a UC520 that was installed earlier this week and the voicemail to email notification to email is not working. I am using my ISP's SMTP server for the Voicemail notification for the UC520 to send out the ...
Jouni, thanks I will give that nat statement a try. Adding this nat statement (with the proper IP addresses) i assune will allow traffic that is allowed by acl to flow either way from the DMZ-to-INSIDE and INSIDE-to-DMZ un-nated? or will I need to p...
I got it figured out. On the ASA 5505 adding the following commands allow the SMTP message from the UC 520 to pass to an SMTP server on the web and deliver the voicemail notification.nat (inside) 1 10.1.10.0 255.255.255.0route inside 10.1.10.0 255.2...
Here is the other funny thing I had an old linkysy soho router with default configuration on it I swapped the ASA out for to test and the email notification goes out no problem so either the linksys is smarter than the ASA or or because it isnt as sm...
