Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,I have configured the EEM and IP SLA on router 2911 with the event "track state down".event manager applet Prueba3 event track 1 state down action 1.0 cli command "enable" action 1.1 cli command "configure terminal" action 1.2 cli command "int...
Hello,I would like to ask you if there were some trouble in applying route-maps in a interface and its subinterfaces, as it is shown:interface GigabitEthernet0/2 ip address 11.0.9.26 255.255.255.252 ip policy route-map GestionRadios!interface Gigabi...
Hello,I would like to know how I can use "set tag" in Route-map in order to lead traffic specific throug static route with "ip route". I believe that I can do the following: access-list 101 permit ip 192.168.120.0 0.0.0.255 any /* Filtering Lan Tr...
Hello,I would like you to help me with the following issue. I need to connect the following in the router 2911: gigaEthernet 0/1.20 encapsulation dot1q 20 192.168.120.0 255.255.255.0to: gigaEthernet 0/0.90 encapsulation dot1q 90 11.0.12.2 255.255.25...
Hello Friends,A Router 2911 have its Lan interface with dot1q encapsulation, my task was configure its Wan interface with dot1q encapsulation too. The point was that a vlan in Lan SubInterface had to go out through other vlan in Wan SubInterface, the...
Hello Ashirkar,I did what you wrote but it didn't work. I guess it doesn`t work because my router 2911 ask a user and password y it goes directly to privileged mode"username rsnpower2 privilege 15 secret 4 LgaZhZWEWKivYt.uo6bM87s3eMiIPtS50PDGv2K1IUA"...
Hello,Ok, Thanks. I wanted to ask you this, because someone said to me that the policy on interface overwrite the polices on subinterfaces, also I read that sometime. This router (2911) is already configured and we see that only a service has a weird...
Hello,Ok, thanks. I asked you this because I read before that the policy in interface override or overwrite the polices in subinterfaces, is that true?This device is Router 2911.Best regards,Sandro
Hello Cadet,Thanks for your feedback. Sorry, I was wrong. As you say, it looks correct. I did the mistake when I tested the ping from the Router-1 while the PRB applied to ingressing traffic and not to the generated traffic in the Router-1.I have bee...
