Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have an ASA 5516 and a Catalyst 2960 X. I have created 2 sub interfaces
192.168.11.0/24 and 192.168.12.0/24 on interfaces gi 1/1.11 and gi 1/1.12.
I have a cisco 2960 x switch connected to gi 1/1 interface of the firewall. I connected one laptop i...
Hello,
I am trying to have 2 interfaces on ASA 5506 to talk to each other and not able to succeed. They have same security level, so they should not need any access list right? Here is the config
hostname ciscoasaenable password 8Ry2YjIyt7RRXU24 e...
Hello,
I am trying to install a voip solution between multiple sites. For a test I have two locations (Site A) and (Site B). They have following configuration
Site A
Cisco ASA 5520 - Software Version 8.2(5)
VLAN 8 - Data ( 10.1.8.0/22)
VLAN 7 - Vo...
I have a Cisco ASA 5505 on a remote location. This firewall looses outside connection randomly. I see there is a syslog message ID 321001 ' Resource conns limit of 10000 reached for system'. Can anyone help me out here?
We changed ISP and also our IP address range got changed. Remote Access VPN is working with local authentication but not with Radius authentication. I really do not have experience in remote access VPN, but I did rebug radius all and here is it what ...
Yeah, learn that the hard way. ASA 5505 was easy to configure, I dont know why Cisco decided to go this way.
Thanks for the help. I will let you know it works.
Marius,
What I did is the connect 2 different interfaces for Voice and data. I have 10.1.11.0/24 for voice at SITE B now which will talk to Voice Vlan 7 at Site A through Crypto map. Hope this works.
ASA Version 9.5(2)!hostname ciscoasaenable passwo...
Philip,
Its in a testing phase right now. Here is the 5506 config, I dropped the plan for creating the VLANs and instead use different port for voice and include them in crypto map. That should work, right?
show runciscoasa# show running-config: Sav...
