Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Dear all,Maybe you also experience some wifi random client disconnection since the FW v1.0.01.07?Since I upgrade to v1.0.01.07 and now also with v1.0.01.08, two of my wifi client experience random disconnection.The first one is a laptop running Windo...
Dear all,Maybe you face the same issue as me, here is the problem: I set some ntp servers on my switch with poll interval enable. After registering the different servers, it get the time correctly and show them as "up" and the next day, they are all ...
Edit: Change title as it's look like the problem come from the SG250-08 PD. See next post. Hello,I would like to report/share a bug I discover on the SG250-08HP switch. It run the last actual firmware (2.4.5.71) and it supply power to a SG250-08 swit...
Hello,
On my RV180, I setup two VLAN (one private, one public). I have my printer in the private VLAN and I would like to get it accessible from the public VLAN.
How should I setup any firewall and/or NAT and/or static route rules to allow that, know...
Dear all,Surprisingly a new firmware 03.29 was released on Nov. 17th. I still can't find the release note. Did someone of you find the release note?Or does somebody know what's new in this release?Thanks in advance.Best regards
Dear Nikola,Thank you very much for your message. Even if this topic is about the RV34x, I refer to the MIB file of the RV160/260 while I didn't find in the MIB files of the RV34x the OID to set a reboot. By chance it's the same OID for RV160/260/340...
Hi,Everything is setup correctly. Finally I add a local NTP server to my network and let my switches point to it. Doing like this work like a charm.Regards,Etienne
I am currently working on a manner to reboot my RV160 and RV340 routers using a Raspberry pi as a "internet ping watchdog" and discover the trick to reboot these routers with the SNMP command, it is the following:snmpset -v 2c -c "set community passw...
Well, it's not possible to chose between NTP or SNTP on the SG250. But as I mentioned in one of my answers, all other devices in my network get the time correctly, using NTP or SNTP. Even an old SG200 switch.Etienne
