Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,We hv a Central Location which has Cisco1751 with One Wic 1T and WIC 2A/S.Three 64K Leased Line to 3 branch offices.Central Router 1751 IP is : 192.168.0.200/24Serial 0/0 12.0.0.1/8serial 0/1 14.0.0.1/8serial...
Hi,we hv a central Cisco 1751 Router which is connected to 3 diff brancehes thru 64K Leased Line.we r having MS Exchange server ver5.5 at Central place.and all other 3 branches are not having servers.Is it poosible that the local nodes in other branc...
hi,Everything fine when DNS is Outside.If i place a DNS in INSIDE, i cant able to even browse and does not reslove.i have enabled fixup protocol domain 53, static mapped, access-list for UDP configured..where i am wrong?.I am using alias command for ...
hi,There is no problem when i put DNS server on outside.But when its in INSIDE i cant access.i am using static nat and access list.i hv used alias command and enabled fixup protocol domain also.any thoughts...thanks
Hi,What would be the best s/w to get a report from PIX1.Bandwidth usage2.FTP/HTTP hitts3.Incoming,outgoing traffic4.No.of hits per IPthen etc.,Pls suggest me which one be best.Websense, Private I or Webtrends?
thanks...I hv an internal network of 10.10.X.X in Local.i hv nated Nat (inside) 1 0 0 0 0i hv webserver which is nated and local ip is 10.10.1.135.My Local DNS server ip is 10.10.3.150. ..can i just add Nat (inside) 0 10.10.3.150 255.255.255.0 0 0is...
hi,help needed from you.I hv tried with write net command..could not successfull.could not copy my PIX flash to tftp.initially i hv upgraded ios from tftp only.but the reverse wise not possible.any comments..thanks..i want to backup PIX flash to tftp
Ok i will try..and My Nat cmd is nat ( inside)1 0 0 then global (outside)1 interfaceso, all the inside users are tranlated in to PIX outside IP..do i need to assign a seperate global ip in Global command..like say..global (outside) global ip and mas...
i hv tried with newly installed Cisco tftp server also.Again its saying....errop opening tftp:// then tftps ip(indefined error).This is the msg i am getting..i hv tried with 1.same file name as source file name..say..c2600-i-mz.120-T2.without any fil...
i hv tried with newly installed Cisco tftp server also.Again its saying....errop opening tftp:// then tftps ip(indefined error).This is the msg i am getting..i hv tried with 1.same file name as source file name..say..c2600-i-mz.120-T2.without any fil...
