About Kebena

Kebena · 05-09-2015

I have Supervisor Engine 8-E with Wired and Wireless Convergence ordered for a hotel. my APs are scattered all over the place indirectly connected to the core switch which is a 4500 one in which i have the sup 8-e card inserted. the APs are plugged ...

Kebena · 05-12-2015

Hi Jacob are you saying that I can still plug the APs in to 2960 PoE switch and manage to control them from 3850 WLC?

Kebena · 05-10-2015

I actually have two ipbase 3850 non-poe switch which will be stacked and serve as core switch on to which the AP licenses will be copied. And the plan was to connect the APs to 2960 PoE switch which i have them already, with this not possible to mak...

Kebena · 05-09-2015

Thank you for this response. with passthrough future that means I can use a mix of 2960 series and 3850 series switches as both support location awareness and mobility i.e. give borderless experience. regarding your comment on whether the LAN base i...

Kebena · 05-09-2015

I don't think you are saying I need to connect the APs onto the uplink ports of the Sup8E. As long as the Sup8E and the PoE line card/switch [ WS-X4648-RJ45V-E] are in the same chassis, the access points can be connected to the line card and still Su...

Kebena · 05-09-2015

Thank you Rasika, but am still not clear: the LAN Base 3850 PoE switch has MA by default? and access points connected to this can register onto the IP base 3850 switch which is acting as core switch and on which the AP licenses are installed? i.e. ...

Member Since	‎06-04-2014 12:26 PM
Date Last Visited	‎05-10-2018 09:55 PM
Posts	9
Total Helpful Votes Received	5

User Statistics

User Activity

Sup engine 8-e with Wired and Wireless Convergence

Hi Jacob are you saying that

I actually have two ipbase

Thank you for this response.

I don't think you are saying

Thank you Rasika, but am