FDT (6.2.3.6 - build 37) Flex configure allows the addition of EIGRP and ISIS but for ISIS there appears to be no command such as show clns to prove it is working. Has anybody tried this?
Hi Cisco Folks Does anybody know why you can not configure a EVM on the ISR G2 with the new DCT. Is this a bug in the configurator? I tried to raise a ticket but the response was to request the serial number and that I gave...
I have a ASA5506 converted to FTD (6.2.3.4-42) and using FDM (the local manager) and even that is slow. A simple change to the BVI address on a empty firewall takes minutes. Either the deployment manager is trying to connect to some external server o...
I upgraded my ASA5505 to genuine Cisco 512MB memory and I found that reboot randomly worked where as pulling out the power lead and counting to 60 worked each time. This was true with 8.2 8.4 9.0 and 9.3. I noticed above that somebody commented that...
HiAll you are doing is bridging the two ports using a BVI. You are not bridging the ATM. It is undocumented and generates warning message but you can define a GRE tunnel and include it in the bridge but MSS has to be adjusted. The other option is DLS...