Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
FDT (6.2.3.6 - build 37) Flex configure allows the addition of EIGRP and ISIS but for ISIS there appears to be no command such as show clns to prove it is working. Has anybody tried this?
I have a ASA5506 converted to FTD (6.2.3.4-42) and using FDM (the local manager) and even that is slow. A simple change to the BVI address on a empty firewall takes minutes. Either the deployment manager is trying to connect to some external server o...
I upgraded my ASA5505 to genuine Cisco 512MB memory and I found that reboot randomly worked where as pulling out the power lead and counting to 60 worked each time. This was true with 8.2 8.4 9.0 and 9.3. I noticed above that somebody commented that...
HiAll you are doing is bridging the two ports using a BVI. You are not bridging the ATM. It is undocumented and generates warning message but you can define a GRE tunnel and include it in the bridge but MSS has to be adjusted. The other option is DLS...
