Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all,
I need to connect site-to-site VPN to a Cisco Meraki device, with my side is a Cisco ASA-X Firewall.
I was told by my client that the only way to establish to connect to their Meraki device is if i turn on "NAT-T NAT traversal" on my Cisco AS...
Hi all,
I have create a new site-to-site VPN with my client on my ASA. However, i can only see decaps, but no encaps.
Here's my ASA config:
interface Port-channel1.2224 vlan 2224 nameif INSIDE security-level 100 ip address 172.30.101.26 255.25...
Hi NetPro gurus, I have a Cisco ASA 5520 with IOS 8.4.2. The ASA is currently sending syslogs to an existing production Syslog server (10.1.1.1). I have a requirement from customer to setup an additional Syslog server (192.168.1.1) with the followin...
Hi Marvin,
Thanks for your response.
How and what commands could i use to see on the ASA to see if the packets are arriving on the INSIDE interface?
Cheers,
Hunt