Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi NetPros,I've got a 836 wich connects via a Easy VPN to a VPN Concentrator 3005. At first I configured the router to tunnel everything, but after encountering serveral difficulties I decided to do split tunneling.The Problem is:After activating spl...
...I've got another workaround as well: ip access-list extended vpn-in permit esp any any permit udp any any eq isakmp permit ahp any any permit ip 10.0.0.0 0.255.255.255 any permit icmp 10.0.0.0 0.255.255.255 any ip access-list extended vpn-outperm...
How did you setup the lan to lan connection? Via the settings under Configuration -> Tunneling and Security -> IPsec -> LAN-to-LAN? You could try to check if there are any logs (not only the configured event classes). On the 506 you could check if th...
I had this problem about two month ago. The internal Interface was connected to a Catalyst 2900XL. After setting the switch-port form speed/duplex auto to 100 full, the problem was solved. I thought this could probably help you. In addition you could...
