Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I would like to establish a VPN connection to a Citrix farm. Can anyone tell me how configure port forwarding and to what internal device to forward to
Very basic question but one I need answered. . .Does a 506 firewall require two public addresses? Can you configure the 506 to work with one public address?Thanks!
I have the following Cisco products installed at my location;Cisco PIX 506 - IOS V6.31Cisco 1720 - IOS V12.1I've been assigned to establish a VPN tunnel in to our network for home remote access. My questions are;1.) Will my existing hardware/software...
The 506e is terminated into an HP 4100 switch. I thought there would be a way to use acces-list and static routes to accomplish this task.Thanks for responding!
--begin ciscomoderator note-- The following post has been edited to remove potentially confidential information. Please refrain from posting confidential information on the site to reduce security risks to your network. -- end ciscomoderator note -- ...
Thanks Jay!Current version - 6.3.1This will sound like a dumb question...If the internal server/desktop network is 192.x.x.x and the ip address inside on the pix is 10.x.x.x, will the pix translate all inbound traffic and pass it through the switch a...
All apologies..The win2k server and all desktops are currently pointing to the internal address on the Belkin router as the gateway. I would like to place the pix between the router and the internal lan without having to make changes to all server/de...
I've looked over the document provided by the url and noticed the need for three registered addresses for the small business network configuration. Here's where I'm confused because we have one static public address. The document states;One outside a...
