Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello all, We have a Cisco ASA 5510 that had a VPN tunnel established with the previous network administrator's home connection. When he resigned, we deleted the tunnel-group. I've noticed, however, in the logs we still see:4Dec 28 201407:51:26 ...
Hello all, We have an ASA 5510 Sec+ firewall, and are trying to set up a remote access VPN using AnyConnect. Our internal subnet is 172.16.40.0/22.Now, when I set the IP Pool to give out addresses inside that subnet, i.e. 172.16.42.32 - 172.16.42.96...
Hello all, I'm trying to set up an SSL VPN on our ASA 5510 using the Secure Mobility client. After working through several issues, I was able to get the test server to download and install the Linux client, and it says that it's connected. When I t...
If he still has the L2L VPN setup at his end, the only thing you can do is to filter his address, preferably on the upstream router - if that's under your control - or have him remove his end's config. He says he has removed it on his end, and that o...
OK it's pretty long and i've cut some chunks out of it.(See attachment) I did packet-tracers both ways and here are the results: ASA# packet-tracer input inside tcp 172.16.40.185 12345 172.16.40.90 80$Phase: 1Type: ACCESS-LISTSubtype:Result: ALLOWCon...
