Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a second WLAN implmentation underway. We have 5 APs and a Cisco 3550 switch. I have deleted all the default vlans / ssids from the IOS AP1200 ver 12.2 and then created two new ones:SSID GUEST associated to VLAN 10 NativeSSID Engineer associate...
I just finished settiing up a wlan with 10 APs and a cisco 2950 switch. I know cisco states mix cells are not very secure but security is not a major factor. I tried to implmet mix cells with the WEP optional command but my cisco 350 clients won't c...
One more thing...If I make the ssid Engineer VLAN 11 native it works but then the guest doesn't work.So I know my eap is setup correctly.Any Help would be great ... thnx
Can you share how you got VLANs working? I have two vlans on my AP1200 and only the ssid guest vlan 2 with native on fully responds to pings, network connections etc... the second vlan ssid biz not native does not.
WOW..I have been trying to get VLANs to work for the past three days. Thank you. I am glad I found this forum. I will try the config you mentioned and let you know how it worked. But I need to know how did you release the IP and config from the inter...
I would move to IOS. 12.2.J11A1 THE LASTE version has an easier TO NAVIGATE GUI MORE INTUITIVE. Plus Cisco is pushing the IOS roadmap. This means support for vxworks will dwindle down.
Same problem here. First remember if you get a 169.254.x.x ip address that is a default address when a nic / radio can't obtain an IP. Maybe my config which is not working 100% can help you fix your setup...I have two vlans: VLAD 8 is guest ssid and ...
