About evertottink

evertottink · 11-21-2014

I have the following problem with a Cisco 1921 with a EHWIC-4ESG.The Cisco 1921 with IOS 15.2 has 2 onboard Gigabit Ethernet ports and with the EHWIC-4ESG an extra 4 Layer 2 Gigabit Ethernet ports.The problem is: Configuration 1 is working and config...

evertottink · 11-24-2014

Problem solved. I don't why but in the router the configuration ip address of dialer1 is: ip unnumbered GigabitEthernet0/1when I change it to (as in the configuration I load it): ip address negotiatedit is working.

evertottink · 11-21-2014

Yes, here is the output of show vlan-switch:VLAN Name Status Ports---- -------------------------------- --------- -------------------------------1 default active Gi0/1/1, Gi0/1/2, Gi0/1/31...

Member Since	‎11-21-2014 03:13 AM
Date Last Visited	‎08-18-2017 04:02 AM
Posts	3

User Statistics

User Activity

Traffic from Vlan wil not go through dialer

Problem solved. I don't why

Yes, here is the output of