Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
network A 192.168.100.0
network B 192.168.200.0
network C 192.168.300.0
network B has a tunnel to network C
network A has a tunnel to network B
traffic will flow from A to B and from B to C
traffic from A will flow to b then to C - However Networ...
working with new vendor and setting up and VPN connection to 5 devices.
devices are listed as destination ip and then they want a source ip. for my side I am drawing a blank for what they want to do here. its been a long week.
Have usser the starts vpn client and it minimizes to bottom of screen saying disconnected.I was able to maximize the client. just to make sure the configuration file was not corrupted deleted current one and imported one copy.just wondering if anybo...
%ASA-6-602101: PMTU-D packet 1420 bytes greater than effective mtu 1386, dest_addr=192.168.y.22, src_addr=192.168.x.51, prot=TCPanybody see these in a windows environment. the traffic is from a workstation to fie server.MTU is set to 1500 at site xMT...
I have one remote ASA that gets outside IP Address from DHCP, Is there any way to pass one of the outside DNS servers to be used as DNS for inside client getting DHCP address?
You would use the commands below to configure eigrp with an autonomus-system number of 100 and assign network 192.168.1.0 , Since 192.168.1.0 network would be a private address network it is on the inside interface.Router eigrp 100network 192.168.1.0...
Hi jrmalmeidaI would do the following:view the incident in question.create a new case and assigned it to mars user who will look at it.you then can email the case to security analyst that will be reviewing it.keith
Same document I found reg key enteries for. I like the Crypto ipsec df-bit clear-df outside as its globally affects traffic for more than one machine. DO not have to touch ever machine just asa.
