Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello to everyone:-i need guidence regarding FWSM. i am runing FWSM in my poroduction network and first time i am try to add and assigne one vlan to Fwsm.i know the command which assigne vlan to FWSM that is below:firewall vlan-group 1 vlan-id......c...
Hello to every one:-1)i want to know the show command to verify the DPD on ASAs. i tried couple of commands but unable to findout DPD is enable on my ASA.2) when i try to enable the DPD on ASA the old commands was below.tunnel-group DefaultL2LGroup i...
Hi everyone:- I am getting snmp related Vulnerabilities. I have snmp v3 implemented with ACL filtering on my network devices and their is no SNMP v1 related configration but my scaning tool still alerting me " Multiple SNMP v1 Reque...
Hello to everyone:- i want to know what is the genral operating system of the new ASA 5525-x. actually i am runing a vernibility scaning tool to scan new ASA 5525-x and the scaning tool recognize the ASA OS as Windows 2000...
hello to all members:- i am trying to convert my old ASA ios config to new. could you guys review and let me know the convertion is look correct???oldaccess-list MGMTSOFTWARE_access_in extended permit tcp 192.168.3.0 255.255.255.0 host 10.0.9.5 eq...
Hi jouni:- Alan is runing L2L or site-to-site vpn and RRI not working with site-to-site its purely feature of Remote access VPN. In site to site vpn both vpn site follow their own static or default route to communicate with each oth...
i think DPD is enable by default and your command helps and now i can see isakmp keepalive commands under tunnel group.but if i want to modiy it the config and type (? make) after isakmp no keepalive option popin. four options available its define ...
Hi:- i think you need the config below ??????interface GigabitEthernet0/1description 802.1q Trunking Interface for test networksno nameifno security-levelno ip address!interface GigabitEthernet0/1.2description Test Subnet 1vlan 2nameif test...
Hello jouni:- i need your help again old config nat (Inside) 1 access-list Inside_nat_outboundglobal (Outside) 1 interfaceaccess-list Inside_nat_outbound extended permit tcp host 10.0.9.28 host x.x.x.x eq ftpnew-configobject service ft...
