Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,I have a problem with my 5508 WLC software Version 8.0.115 in High Availability ModeMy WLC loses its connection and once the connection is restored the HA is down.Redundancy State = Non Redundant (Cisco Controller) >show redundancy summary ...
Hi,I just found out that configure terminal is available on a LAP1262N AP-AIR-E-K9 in mode CAP.But another LAP1262N-AIR-E-K9 not the configure terminalFind enclosed AP version and option configurehow have the configure terminal in AP mode CAP, while ...
with the version 7.6.130 no problem reboot controllers and mode HA. My problem occurs after the update to version 8.0.115. do you have the command to a debug to check the HA Mode please.
Here the client 192.168.0.0 : (Cisco Controller) >show client detail 1c:99:4c:6f:c6:96Client MAC Address............................... 1c:99:4c:6f:c6:96Client Username ................................. N/AAP MAC Address.................................
once the mac adress remove with IP 192.168.0.0 on the WLC other MAC adress IP 192.168.0.0 always present on the WLC. But always different MAC adress with IP 192.168.0.0 on WLC. Do you have an idea to allow my DHCP server and block the DHCP pirate.
