Hi Guys
Has anyone experienced any performance impact by redirecting traffic to SFR module ver 6.0?
I have two ASA5525-X running SFR version 6.0.0 connected to DC firesight ver 6.0, there is a 100Mb internet circuit on the firewall and not more tha...
Hi guys I am about to convert a pair of 5596UP+6x connected 2Ks from Classical Ethernet and vPC mode to FabricPath in production environment where hunders of servers connected and getting outage window is almost impossible! So you see my challenge it...
Hi GuysI am interested to use identity firewall but I am using OpenLDAP , as far as I know there is no OpenLDAP agent like AD Agent! Does it mean that I only able to use OpenLDAP for VPN authentication and not for identity feature ?ThanksEhsan
I have a customer with same problem on ISE 2.2 , Single SSID (Flexconnect) and iOS devices are getting unsupported error .This is 2018 , are we still need to enable captive portal bypass ? is there any other workaround for Flexconnect Single SSID?Wha...
You mean even with 9500 series you have to wait for version 3.1 ? I think the Multi-Site VM appliance is already available for download and deploy for version 3.0
Hi I just wanted to see if you found any answer to your question on fix chassis Spine supported for Multi-site? Looks like after months still the only supported hardware is 9500 series with 100G line card! ThanksEhsan
You might probably hitting the same issue as I , here is my suggestion :
1-Re-configure Realm to use (Pre-Windows 2000 NetBios Name) of Domain
2- Stop/Wipe out AD User Agents and build the config from scratch , this time put the same NetBios nam...
I ran to the same issue https://bst.cloudapps.cisco.com/bugsearch/bug/CSCux39125
and I have switched the Domain name under Realm configuration to NETBIOS name and it worked right away. Here is the catch :
Turns out my customer NETBIOS name was a dif...
