Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,We have a strange intermittent issue (not all devices) with connected devices (mainly PC's).We have a 5 * c9300-48U stack running Version 16.09.03 with network-advantage enabled. The issue:A PC gets a DHCP address from the Windows DHCP server (The...
Hello, I was wondering if someone can clarify the Virtual FMC licensing (v6 and above), the General License FAQ mentions that ' Virtual Firepower Management Center requires an entitlement for each device it will manage', we have 3 * ASA's licensed fo...
Hi, We are currently working on a migration of systems from our traditional network (VLAN's, STP etc.) to a third party hosting company running VXlan, overlay networks.
Unfortunately we have to maintain the existing IP space so extending l2 broadcast...
Hi,We have started to use a number of ASA5512x running 8.6(1)2, the general coding seems OK and the systems are running well. I am now trying to mimic the dynamic NAT/PAT configuration from an ASA running 8.2(5).We use dynamic NAT/PAT for a number of...
Hi, Thank you for the quick response and my apologies for delayed reply.Yes the DHCP server is in the same VLAN, ip helper used for other VLAN'sI will need to get the full ipconfig next time it happens as I only have the short version as well as the ...
Hi, Thank you for the quick response and my apologies for delayed reply.1: Correct the port is not being blocked, no err-disabled or anything to note2: I will need to check the next time it happens, I believe the PC can't ping the switch or the switc...
Hi,Thank you, I have now tested your configuration and all appears to work when combining the nat with interface ACL's defining the destination addresses.Thank you.
