AWSOME

Hi,please check the below linkhttp://www.cisco.com/en/US/products/ps9422/products_configuration_example09186a0080b4ae61.shtml?referring_site=smartnavRDhttp://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00808c995...

Hi Jake,Please follow the below dochttp://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a008081e621.shtmlfollow the ipsec tunnel mode section in the belwo doc.http://www.cisco.com/en/US/tech/tk827/tk369/technologies_white_pap...

Hi KS,Please check the below DocEZVPN network ext modehttp://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a0080808395.shtml?referring_site=smartnavRDhttp://www.cisco.com/en/US/products/ps6120/products_configuration_exam...

Hi Eric,Add this line for nat exemption access-list inside_nat0 extended permit ip 192.168.1.0 255.255.255.0 192.168.5.0 255.255.255.0how ever above nat will come in picture after the tunnel triggers please post the debugs from the below debugs comma...