Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi allA while back I had a problem with using active ftp trough our ASA 5510.Thanks to he help on this forum, the problem got solved.Topic: https://supportforums.cisco.com/thread/2053280Now active ftp works fine, but now we are not able to use RDP to...
Hi allI'm having some trouble setting up an active ftp session from inside to outside.I've read the other topics on the forums, but i can't figure it out myself.I created some acl's and port forwards, i also configured the inspect FTP in the global p...
Hi allI have an asa 5510, on which i configured a clientless ssl vpn.But when i try to connect to https://ip address, i get an "connection timed out" error.I've attached the config, if anyone has an idea, please let me know.Thank youBert
Hi AllI have a brand new ASA 5510 here, i configurde it so that i can use ASDM, but when itry to launch asdm i get prompted for my username and password. After that nothing happens.I've attached my running config.If anyone has an idee please let me k...
HiI have a ASA 5510 that has a couple of site to site vpn connections, they workfine, the only problem is that they cannot reach the webserver in the dmzVPN subnets 192.0.2.0 255.255.255.0, 192.0.4.0 255.255.255.0, 192.0.6.0 255.255.255.0DMZ 172.16.0...
The router with the address 192.0.0.187, isn't used in our internal network, it is a routerplaced by one of out manufacturers to monitor some machines.We do not control it, and do not use it, I just had to forward some ports to it.The internal networ...
HiRDP is working even withoutpolicy-map global_policy class inspection_default inspect ftpNow my previous problem of the active FTP has returned.With the asa 5510 as default gateway, we are unable to use active ftp.Regards
Ok, let me explain, RDP always worked as desired until I changed the settings to allow active ftpas suggsted in this topic: https://supportforums.cisco.com/thread/2053280Now active FTP works, RDP doesn't.When I configure:class class-default set conn...
