Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello, Since I enabled the COPP feature on the ME-3600X, I see "RM Drops"for some queues but instead I have no "Policer exceed".What is the exact meaning of "RM Drops"?RTCEADMUNI01#sh platform qos policer cpu 0 0########### Stats for CPU queue 0 ####...
Hello,I had the RDP working fine with the version A2(3.1) with redundant ACE Modules.After an Upgarde to A2(3.2) all the existing RDP sessions were still working, but the ACE did not redirect any new RDP sessions. Instead other applications as HTTP a...
Hello,I know the ACE Module does support the protocol RTSP. The App-V of Microsoft is also using the protocol RTSP.Unfortunately in my configuration, the ACE to load balance the RTSP, the ACE seems not to recognise the negociated TCP ports in the ra...
I didn't have many time to troubleshoot. But it seems the TCP session was established between the client and the ACE (telnet VIP 3389), and the ACE did not forward RDP traffic.
Yes, other applications, I mostly tested one with SSL Termination on another Contexte, also use Predictor and Source NAT. This apllication was working with both versions A2(3.2) and A2(3.1). I don't have any feedback for other applications.
Yes, we have 2 ACE Modules in FT and we upgraded so it took over the existing sessions.We are loadbalancing RDP at L7. with "policy-map type loadbalance rdp first-match ...". We also use PAT on the source addresse. I attached an extract of the config...
Hello,Yes, you can configure a "Sticky Layer 4 Payload" as descirbed on this Link:http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/ace/vA2_3_0/command/reference/sticky.html#wp1039276Unfrotunately I do not have any working example. ...
