Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am able to get my VPN up via SDM and everything communicates fine. But as soon as I save and refresh, or logoff and log on the system changes the VPNs ACLs to something else. Which causes the VPN to go down. Do I just have a faulty image? Is this a...
I'm having an issue with DCs replicating and wanted to rule out the ASAs each are using for the VPN tunnels. Once the VPN established does traffic still need an any any ip ACL to allow any and all inside traffic between these two subnets?This is betw...
I've read a few guides and understand that you basically need to copy over the running config, the ASA.bin, and ASDM.bin file to do the upgrade. What I'm confused about is, on our flash currently we have a few package files like, securedesktop.pkg an...
We want to implement Netflow so want to upgrade our 5510 to 8.2.5. But have a few questions.This device has 64MB of flash and 256MB of DRAM. Would I need to upgrade RAM? Right now we have about 25 site to site VPNs running through this thing as well ...
I'm trying to configure external access to our spiceworks server as well as various other software we use.I used this to configure my cisco firewall:http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a0080bf150c.shtmlI have...
Hmm. We don't have a PC with a CF reader at the moment. The guide read mentioned putting in the activation code after the transfer. Do you still have to do this using your method?
What is the best way to ensure copy of the hidden files? Can I just put the new flash in the external slot and use the copy cmd to copy disk0 to disk1?
