Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,I want to comply all the domain computer with latest windows Patch Installed. How we can create this condition under which catagry as mentioned below?Thanks.
Hello,ASA Firewall is running in Active/Active mode. Below is the configuration of the firewall and IPS SSM module.We are not getting event on IPS sensor when we type "show event alerts".IPS configuration:++++++++++++++++++++++IPS1#IPS1# sh configura...
Hello,SLA monitor configured on ASA for two ISPs.As ISP1/ISP1 Router is up and running so inside users are translating with Public IP address of ISP1 that is 110.2.2.0/28 subnet.As soon as ISP1/ ISP1 Router goes down then inside users will use ISP2 a...
Hello,In cisco ASA firewall. we have four interfaces. The details are given below.gig0/0 ---- insidegig0/1 --- outsidegig0/2 --- DMZI have one IP address/host (10.1.1.1/32) in inside.Below is the requirements.1. When this host(10.1.1.1/32) will go to...
Hi,By the way fourth interface used for failover. Unfortunatily, some users are in DMZ and DMZ has severity level 50.These DMZ users want to access IP address 10.1.1.1.The traffic is coming from lower securtiy-level to higher security-level.Regrads,
Hi Jouni,I want to connect another interface of ASA with another ISP. and need to configure ASA for 10.0.0.0/8 subnet(usersubnet) to use this ISP for internet.Is this possible to connect the server from ISP1(Using NAT translation) and User to connect...
