I know this is configured on the router, but it pertains to the local LAN....If an IP helper address is specified and UDP forwarding is enabled on the router, broadcast packets to the following port numbers are forwarded by default:Time Service port...

Ran into a case where a PC booted up with a duplicate IP address as a server on the same vLAN and thus, the ARP table in the MSFC2 router got corrupted ie. one MAC address with two IP addresses. I had to clear the ARP cache on the MSFC2 router to res...

Currently have 2 Catalyst 6509's running with:set boot config-register 0x2Can anyone tell me what 0x2 (hex 2) indicates? Or point me to a URL that will have this info?Thanks!!