Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,in my CIAC 3.1.1 setup all my provisioned VMs get two network interfaces, one in the mgmt network and one in the user network. Why is that? I think I'm missing something here ... I would think they get a NIC in one network only.Regards,Sascha
Hi Lee,thanks for your help on this. I solved this now by removeing the VDC and re-creating it. I did not have too many VMs yet, only test stuff, so that was ok.Best regards,Sascha
Ah ok, I thought the Management Network was mandatory per VDC, but now I see that I can order a VDC without specifying such a network.How can I remove a Management Network from an existing VDC?Thanks,Sascha
Hi Hunt,did you check this URL?http://www.cisco.com/go/waasFrom there you can drill down to Cisco WAAS software, Cisco WAE's (hardware to run WAAS) and so on.Regards,Sascha
Hi,have you been able to solve your problem? Looking at the configs, I'd suggest the following:1) On the switches, use 61 redirect in on the LAN side and 62 redirect in on the WAN side.2) Upgrade your WAE's to 4.0.11 or 4.0.13.3) On the WAE's, disabl...
