Hello,
I try to configure my ASA firewall to redirect http port from outside (outside-OVH) to inside (vlan1).
Please find here the following configuration:
object network NAT-SERVEUR-HTTP-IN
nat (VLAN1,outside-OVH) static interface service tcp...
Hello,I've an issue for authentication on my internet provider with my Cisco's router.My config is:interface FastEthernet1 description ONT no ip address pppoe enable group global pppoe-client dial-pool-number 1interface Dialer1 ip address 86.204.1.18...
Hello, Do you have another idea?I perform an install with another firewall (Pfsense) and this configuration works fine (so is not a provider issue).Thanks for advance,Arthur
I try this, but issue remain the same.Please fin din attached the config then I tested, sh nat result, and logs received on the ASDM. However, I added the following after my test:object network NET-VLAN1 nat (VLAN1,outside-OVH) dynamic interface Beca...
Hi, Yes you are correct: "shrun3" and "shnat5" are the last changes and is the current configuration on my ASA. nat (VLAN1,outside-OVH) source static NET-VLAN1 NET-VLAN1 destination static NETWORK_OBJ_10.0.33.0_24 NETWORK_OBJ_10.0.33.0_24 no-proxy-ar...
OK for the RN, that confirm that I read. PPPoE work fine for another thing: I can access to the internet from inside, remote VPN is up and running fine.For the other service, I try to configure but I have the same issue. Indeed I am testing from a mo...
It reassure me that I did'nt make anything wrong :-) However that's nice...I try to delete and recreate a new HTTP-SERVER object, and I keep the same issue...Maybe a bug? I don't have see similar issue in the release note but, maybe can I try an upda...