Ok, that throws a bit of a spanner into our works, but I think we can overcome that: 1. We have quite random .1ad on the AC, so we can split it into multiple PWE3 based on VLAN ranges  2. Put the AC into a bridge-domain and add a number of PWE3s out ...

Does this mean I can't have a 20G PWE with PWHE, since all the traffic will have the same label and that will force it to use one member of the bundle?

Hi Xander, We use ASR9k as a BNG and terminate the sessions on PW-Eth headends. The BNGs (9001) are connected to the rest of the network over two 4x10G bundles. The rest of network is also based on Eth-bundles (various sizes). At this stage we have ...

Hi, What software version allows for those options to be inserted? On our (5.3.4 pre-release) I only get this: RP/0/RSP0/CPU0:mdr-tdv-b(config-dhcpv6-proxy-profile)#relay option ? interface-id Interface Id option remote-id Enter remote-id value RP/0...

Answering my own question :-) It's possible to correlate the DHCPv6 and radius information. The proxied packet contains the 'interface id' option (18). After looking at that value I realised it contains hex-encoded details: interface number, SVID an...