Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
IntroductionConfiguring Syslog ServerAbout VSM and VEMVSM Log Collection:VEM Log Collection: IntroductionThis document describes about the logs and ways to collect them for a Nexus 1000v. Logs are the primary way to identify and troubleshoot issues w...
IntroductionUCS B-Series Tech-Support Files: OverviewCollecting a tech-support: CLICollecting a tech-support: GUIReading Through the UCSM Tech-SupportRelated Information IntroductionThe purpose of this document is to help you in collecting and unders...
Agreed - server discovery should still happen without upstream connectivity. You might also want to doublecheck to make sure the adapter card and server BIOS versions are in line with the configuration guide specs, as this matters for discovery as w...
Hey Alex -The CIMC needs to be in DHCP mode in order to get an IP out to it from the FI. Go into the CIMC settings and restore them to Factory Defaults. There should not be any static IP configured on the CIMC for UCSM integration.Jen
Hey Alex - How's it going? What type of adapter card do you have in your server? If you only have one cable to each FEX, can I assume VIC 1225 in single-wire mode? Before the UCSM can recognize your rack mount server, you need to make sure that yo...
Brian - Also, is there anything in the system event log within the Windows OS that might give an indication as to why the server is shutting down. Perhaps, some kind of licensing/activation issue?Jen
Sudip - The 5K will connect into your 7K just like a normal switch with a trunk link. The 2K can be thought of as an external linecard for the 5K. In order to configure the interfaces that you select to integrate the FEX with, you will need to conf...
