Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi I have just brought ACE module back online after it lost its configurations but some ft groups have ended up in cold state after primary ACE failed to replicate the configs. I understand ft groups go into cold state when keys and certificates are ...
Hi,I hope someone can help. Active ACE-01 module in our production network has lost it configs after an IOS upgrade on a switch. Currently we have traffic running on back up ACE-02.I want to know what is the best way to bring ACE-01 back online. On ...
Hi,I was wondering if someone could help.I recently changed the entire configuration on two 6509 switches, and the fibre modules on slot 7 and 8 have gone down on BOTH switches. It would be easy to say that its a hardware fault but I cannot understan...
Hi Gaurav,Sorry for late, yes I worked it last week and it was the missing ssl files on the 3 contexts that were causing it to go into cold state. The person who designed has left the company so i am not sure why only these 3 context are configured ...
Is there anyone who can advise me please ?Maybe my concept of synchronization is wrong. As the ft groups act as independant redundancy instances, if the ACE-01 realizes that it is active for one particualr ft group it will not consider itself as the ...
Would anyone know if the line cards are maybe failing due to Embedded Event Manager configuration ? The person who configured this lab has left the company so I am not sure what the EEM configurations actually mean.The reason i am suspecting the EEM...
Hi GabrielWe have 2 port-channels set up between 6509s.. one port channel on gig interfaces and another port channel on 10G interfaces. We also have 10G port-channel to UCM.I have tried hw-module reset after enabling power but goes off againRegards,S...
We are using SXF12a on our production network and its working fine. We are trying to mirror it to production which is why I changed the config to match one of our sites but it seems to have all gone wrong. All the modules were up and running untill ...
