Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi forum,Is it possible to force an ASA to release and/or renew a DHCP lease? To be clear, the ASA is a DHCP client in this case, getting its IP address from an ISP on an external interface. I couldn't seem to find anything in the docs for this fun...
I have a need to set up an ASA5505 as a "hardware client" connecting to an RV082 functioning as an IPSEC VPN server. Is this configuration possible? If so, are there any gotchas or, ideally, configuration examples that are available?Thanks in advan...
Hi forum,I was wondering if it was possible to set up an ASA to provide remote access VPN connections (either/both IPSEC or WebVPN/SSL) from the outside world if the outside IP address is dynamic (i.e. obtained through DHCP)? I understand how to use...
Hi forum,I have a dual ISP setup, with two separate output interfaces. I'm automatically monitoring the primary ISP via "sla monitor" and "track" commands, and removing the default static route when the ISP's router is not reachable. That's working ...
Hi forum,I'd like to create a QoS class/policy map for VoIP traffic to steer the traffic to a priority queue. I'd like to configure this such that traffic with DSCP EF *and* to/from specific IP addresses are matched. It isn't clear to me whether th...
But specifically when I delete the "ip address", does that cause a DHCP release?The scenario I'm interested in is if I'm using the ASA as a router for my ISP, but I want to switch to a different router (i.e. not the ASA). My ISP will not provide a n...
That's surprising ... Presumably that would be "no ip address dhcp" command from the interface level of the CLI? Does that command specifically generate a DHCP release on the interface? Occasionally I need to release the DHCP IP address - otherwise...
Is there something special about the RV082 having support for "EasyVPN"? I guess what I'm asking is whether I could use the EasyVPN configuration on the ASA as a client to the RV082 IPSEC VPN, like any other pre-shared secret IPSEC VPN client, or wh...
Thanks. I've set up VPNs on a few boxes with static IP addresses. Is there anything different that I need to configure? Or does the same VPNconfiguration work for both static and dynamic outside IP addresses?Thanks...
