Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi, I've deployed a Cisco NAC solution (utilising CCA 3315) in a OOB Virtual Gateway deployment. So far it's working great on XP clients with single sign-on. However when run on Vista clients a problem occurs when the user idles and the screen locks....
Hello all,Getting desperate here..been trying to get the Cisco NAC solution (Cisco NAC 3310) to work but with limited success, and the results are so far discouragingly random. I have a lot of experience with Cisco products and so far this one has be...
Hi all,I'm very new to Cisco NAC so please bear with me. Trying to deploy a Cisco CAS and a Cisco CAM in OOB VG mode. I've added the CAS into the CAM. However when I try to access the CAS web page directly (i.e. through browser https://<CAS IP> and l...
Hi,I have a setup with 1 ASA5520 with 4 interfaces. I need to connect 2 core switches (Cat65xx) to two of the interfaces, while another 2 interfaces goes to the internet router and the dmz respectively. The core switches are running in a redundant to...
I've physically installed a new NM-1T3/E3 card into our Cisco 3660 router currently running c3660-jk9s-mz.122-32.bin software. It has 64Mb RAM and 16Mb Flash. The problem is that our router does not seem to recognise the card. This is apparent from s...
Thanks man,I've finally got it to work. Turns out that the problem was that i had previously put in a discovery host on the access agent. Now it's working great cheers,woon
Hi,I've tried those steps you mentioned and it's working! So far, L3 support unticked, trusted and untrusted interface same IP, (one on vlan 61 and anothe on unused vlan 999 on the untrusted interface, default gw the same). I found out i set the wron...
Thanks, will try out your suggestion. Currently "Enable subnet based Vlan retag" is ticked, so I will untick that. I'm already using a unused IP address for the Managed Subnet IP.As for the OOB port profile, which options are you refering to? For the...
Thanks JVR775,I tried https://casip/admin and it worked...also did a couple of things including changing the cam and cas trusted vlans to different ones, creating roles for authenticated users. It worked to some extent , at least now my test client c...
Thanks to everyone for their input. I looked through the documents that you listed - didnt realise that it was a special IOS version. I decided to use the Cisco Feature Navigator tool again, but this time specifying the search by Feature, and a more ...
