Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All,I need to upgrade the version for ASA 5520 pair that runs in multi-context mode.Here is my issue:It seems to have the following contexts:If I change to system context the copy tftp command is available. However, it cannot connect to any IP add...
Hi,We are in the process of migration some Nortel phones at various remote locations.These remote sites are not managed sites and some of them are using their own internal IP address forwarding traffic to MPLS edge router.With the PIX, using Static N...
Hi,The DFM 2.0.10 Device Details for C6509 switch shows CPU as managed, however shows utilization as unavailable. We want to set up alerts for CPU spike and it is not working as data is not being captured.Any idea or pointers in the right direction i...
Hi All,I need some help with the following and thanks in advance.The size of the current LMS syslog file is over 6GB. I have run the logrot.pl utility to set the size as below: Number Logfile Name Number of Archives Max Size Compr...
Hi All,I have run into a situation with the CSM 3.2.1. It is not showing any data on the IPS Event Viewer or the Real-Time Dashboard.Any help is appreciated. Thanks in advance.
Thanks Kusankar.You are absolutely right. After I understood the "system" context can access the inside interface without added config, this is what I wanted to verify this morning.It was the CheckPoint in the middle and after I updated the policy I ...
Thanks again Halijenn;You put me on the right track regarding reachability to "inside" interface from "system" context without any additional config.I suspected it could be the CheckPoint blocking tftp and that is what it turned out to be.I was able ...
Thank you Halijenn.However, extgw seems to be the "admin context" based on the "show context" below and the tftp server is accessible from the "extgw" context. The tftp subnet is one of the LAN subnets and it is routed through inside interfaceDo you ...
Thank you."snmp-server user nwadmin cwpriv v3 auth md5 c1db5z3" is what I had initially which does not show up in the config.The first line worked I think as I saw the test CPU util alert I set up with 1% thershold firing immediately.Let me monitor t...
