trying to establish a connection on an ibm 3745 controller via two IBM 5822 modems to a cisco 2600 router using sdlc encapsulation secondary bridging data from the serial port to the E/Net port to run the 3270 client ???
Thanks for the reply, a little confused about the vamc and partner mac -- are these just arbituary ( made up addresses) ??In my case the sdlc address is 40
What are your thoughts on this -- think it will work on one router interface serial 0 encapsulation sdlc-secondary sdlc address c1 sdllc traddr 0110.2222.3300 222 1 100 sdllc partner 4000.0122.0001 c1 interface loopback 0 ip address 1.0.0.1 255.255.2...
In this case I cannot use DLSW you loose that option with the SDLC in a secondary role--My configuration 3745 controller -- 5822 modem -- 56k serial link --- 5822 modem -- cisco 2600 ent. IOS -- laptop e/net running 3270 emulation.. The 3745 is Prim...
Thanks for the reply,while I'm not an expert I must agree its not for beginners a little more info. This is a single router deployment and the 3745 is in a primary role, we have established SDLC communication with the encap secondary command on the s...
Thanks for your reply, This is a single router deployment and the 3745 is in a primary role, we have established SDLC communication with the encap secondary command on the serial interface,however when using this option you loose the DLSW. Issue is ...