Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a client that I want to setup to use VPN with Small Business Server 2011 Standard. There are only eight employees at this company so my plan is to simply install the AnyConnect client only on the machines that will need it (5 users).I am simp...
I am working with a client who has two Windows servers:Server 1 is a SBS 2011 standard server (192.168.1.5)Server 2 is a Windows 2008 R2 server (192.168.1.9)Naturally both servers have a fixed IP address. Additionally the internet provider they use ...
I have been reading the various related discussions on the SG300 and SG500 switches regarding setting up VLAN's and DHCP on those VLAN's. For whatever reason I have been unable to even get this simple task to work.First thing I did was to update my ...
I am hoping to tap into the vast wealth of knowledge on this board in order to gain some "best practice" guidance to assist me with the overall setup using the ASA 5505 for a small business client. I'm fairly new to the ASA 5505 so any help would be...
The internal subnet is 192.168.1.x.Server 1 (SBS 2011 Std) IP address is 192.168.1.5Server 2 (Windows 2008 R2 Std) IP address is 192.168.1.9Router (ASA 5505) IP address is 192.168.1.15Outside IP I'm using for this post (no actual outside IP) is 99.19...
Tom,Thanks ... I followed the steps you outlined and it worked! The only difference being that I have an Asus RT-AC66U router and the there is no "enable multiple subnet" option. So, I just followed your instructions on creating the static routes i...
Jon,Thanks again for the info!For starters the switch was running in L2 mode instead of L3 mode, so that was the first thing I had to correct. I also popped over to the Cisco Small Business forums and found some good info on setting up the switch a...
Hey Jon,Hopefully you see this!I'm a little confused about item #2:2) create a new vlan together with a new IP subnet for the Netgear WAN interface to the ASA inside interface connection. Note this IP subnet does not need to be in DHCP and it can be...
