Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,an internal (inside) server has to be accessible from outside. Following the descriptions here http://www.cisco.com/c/en/us/support/docs/security/asa-5500-x-series-next-generation-firewalls/113024-asa-82-port-forward-00.htmla static nat with PAT f...
Hi all, I am gobsmacked:configured two Catalyst 2960G switches connected via trunk ports. Configured on both of them int vlan1 with IP address from the same subnet 192.168.52.0/24. Configured all other ports on both switches with sw mo accsw acc vlan...
Hi Freddy,
the easier and smart way to do this is to commission someone with knowledge to do that for you
No, jokes aside, doesn't Surrendra's script above help you to infer the correct configuration for your occasion?
Best
Contd. relevant excerpt of sh nat:NAT policies on Interface inside: match tcp inside host PROBLEM_SERVER eq 80 outside any static translation to outside-interface/80 translate_hits = 0, untranslate_hits = 0 match tcp inside host PROBLEM_SERVE...
Hi David, sorry, my output was shortened: you are correct: %ASA-3-710003: TCP access denied by ACL from ZZZZ/65344 to inside:XXXX/443Yes, this was implicit ACL: look at the dump above that I provided:Phase: 4Type: ACCESS-LISTSubtype:Result: DROPConfi...
