About Thomas Brancato

Thomas Brancato · 02-26-2015

I am looking to understand how CAPWAP works with multicast routing. Since CAPWAP traffic is tunneled and the IP header is sourced from APs destined to the WLC (and vice versa), it would seem to me that multicast routing would only need to be enabled ...

Thomas Brancato · 08-31-2017

Great question

Thomas Brancato · 03-06-2015

Thanks for the response Rasika. I have attached a PCap to illustrate the issue. This PCap was Taken on the R0 interface to Switch A. The important thing about this PCap is that it shows that there is no multicast referenced below the CAPWAP layer, wh...

Thomas Brancato · 03-04-2015

I am still very interested in the answer to why is Multicast required on R0 and R1, when the actual IP header source and dest are the AP and WLC, and does not contain multicast information?

Thomas Brancato · 02-27-2015

Your post on configuring Multicast on WLC was exactly what I was looking for in relation to IGMP detail on the WLC. This allowed me to view that the AP is part of the multicast group. show network multicast mgid detail ### I conducted a PCap and the ...

Member Since	‎08-03-2013 03:47 AM
Date Last Visited	‎08-28-2018 12:48 PM
Posts	5

User Statistics

User Activity

Wireless Multicast Routing

Re: FMC/FTD Add NAT Policy via API

Thanks for the response

I am still very interested in

Your post on configuring