About dimitrihofman

dimitrihofman · 08-14-2013

Hi,Because of end-of-life of the wireless AP 1140 series, we decided to switch to the 1600 series.We have now several AIR-SAP-1602E devices which show the same behaviour:On the web interface, there is an error indicated for the transmitter power (see...

dimitrihofman · 08-29-2013

Hi Amjad,No, I use the standard dual band antenna from Cisco. Gain is 2 dBi for 2.4Ghz and 4 dBi for 5 GHz.I have configured this so in the AP. The config that Sven posted is not from my AP (but has indeed an antenna gain of 128dBi which cannot be co...

dimitrihofman · 08-29-2013

Hi,Tried several actions using the CLI. What I can see is that the AP is accepting the CLI commands and is executing them correctly.This leads me to conclude that the webinterface is buggy. - The web interface continues to show an error for the trans...

dimitrihofman · 08-22-2013

Dear Amjad,Hereby the interface status from the command line. Hope this give you a clue on what might be wrong.Regards,Dimitri Hofman

dimitrihofman · 08-14-2013

Dear Amjad,Thank you for replying.The problem occurs on all AP's.The AP's are powered via a power injector PWRINJ4 from Cisco.Not sure what you mean by the interface status? I attached another screenshot, hope this is what you want to see.Regards,Dim...

Member Since	‎08-14-2013 01:53 AM
Date Last Visited	‎08-18-2017 04:27 AM
Posts	5

User Statistics

User Activity

CIsco AIR-SAP1602E - transmitter power error

CIsco AIR-SAP1602E - transmitter power error

CIsco AIR-SAP1602E - transmitter power error

Re: CIsco AIR-SAP1602E - transmitter power error

CIsco AIR-SAP1602E - transmitter power error