I have a AIR-LAP1242AG-E-K9 that I was working to flash to the Autonomas version AP1242AG and during that process I guess I held the mode button down longer than 2 seconds when I tried to factory reset it as now everytime I boot it...
I have a good file name, verifed that. I do not know what an md5 hash is but you may be onto something wth the ping.I cannot ping it, at first I was going through a four port home router but then I went direct PC to AP and that did not work and the...
I think I am on to something hereI set the PC IP address to10.0.0.4 and loaded the tar file into the C:/ root dir and then did the AP reboot wile holding the mode button for 20 seconds and this is the results. I turned off the win firewall and the ...
I see what is going on now, it is giving the errors because it cannot locate the main controler.*Mar 1 00:00:06.466: %CDP_PD-4-POWER_OK: Full power - AC_ADAPTOR inline power source*Mar 1 00:00:06.472: %SYS-5-RESTART: System restarted --Cisco IOS S...
The Tera Term program you suggested rocks. That did the trick and now I feel I have some control on this APThis is the boot up you asked forAP001a.e253.e186>AP001a.e253.e186>Xmodem file system is available.flashfs[0]: 9 files, 3 directoriesflashfs[...
That is the problem, I do not know how to get into it via the colsole or that is not working either. I have a feeling it is more likely the first reason.I did want to add that when I power it up without the eithernet cable pluged in the led starts ...
