Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Can anyone tell me if there's any magic needed to get the standalone Aironet 1602i (AIR-SAP-1602I-E-K9) to react on its web interface? The device comes up when connected to the switch (Netgear M4100-26G-PoE), blinking green status LED, then I guess ...
Hi Scott, I don't know where in the world you are but if ever you come to Munich give me a shout and I'll buy you a beer or two. Worked like a charm, thanks again.Cheers,Toby
The Unit and the box both show AIR-SAP-1602I-E-K9, here's the dir output:APf872.ea7c.792e#dirDirectory of flash:/ 2 -rwx 1048 Mar 1 1993 00:00:15 +00:00 private-multiple-fs 3 -rwx 0 Mar 1 1993 00:00:34 +00:00 config.tx...
Hi Scott, you're a life-saver, but I saw these links on other posts you made and at this point I think Cisco coporate policy defeats common sense - because I don't have a support contract I can't download new images so I have to return the unit now.C...
So, armed with a console cable and PuTTY I see the problem:*Mar 1 00:55:38.574: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP. Renewing DHCP IP.*Mar 1 00:55:44.026: %CAPWAP-3-ERRORLOG: Invalid event 38 & state 2 combination.*Mar 1 00:...
Starting to look like the device is a dud - on the AP's IP address "telnet: Unable to connect to remote host: Connection refused" and apart from the flashing green status LED the only sign it's alive is the ping response. Will wait for the console c...
