About S.M. Al-Maimun

S.M. Al-Maimun · 07-10-2016

Dear Team, Need your help regarding the NPE-G1 password recovery. Due to security issue, previously "PASSWORD RECOVERY FUNCTIONALITY IS DISABLED" function was enabled. Now we have lost our given password and unable to break the Password. 1. We have ...

S.M. Al-Maimun · 07-11-2016

Thanks Leo Laohoo, It is solved now. After trying in many way, break key option is totally not working for NPE-G1 of c7200. No luck was there for rommon mode. 1. Then we have removed the Lithium battery of NVRAM and put 12 hours powered off the devic...

S.M. Al-Maimun · 07-11-2016

hi Leo, Now break key has been taken but it is not asking for the reset option. See the below output: Cisco IOS Software, 7200 Software (C7200-JS-M), Version 12.2(31)SB10, RELEASE SOFTWARE (fc2)Technical Support: http://www.cisco.com/techsupportCopy...

S.M. Al-Maimun · 07-10-2016

There is only option is to remove ram and nvram battery remove. And we have done that and checked. But I am interested to know is there any other scope or not. Obviously there should have solution. Please see the link to know the device. I want to gi...

S.M. Al-Maimun · 07-10-2016

1. We have followed almost all Standard key format. 2. Pc is connected with the direct comm port to console. All the console out put displaying fine. Still no luck. Expecting a hardware way out to login to rommon mode login to change the boot registe...

S.M. Al-Maimun · 07-10-2016

Tried from Both. Laptop: HP-Probook 430 G1 (with Teraterm Terminal Software) & PC HP Elite Desk with key board hp (with putty software).

Member Since	‎09-10-2013 07:01 PM
Date Last Visited	‎08-18-2017 04:27 AM
Posts	7

User Statistics

User Activity

Cisco 7200 with NPE-G1 Unable to login to Rommon Mode [Break Key receiving but Rommon mode not coming]

Thanks Leo Laohoo, It is

hi Leo,

There is only option is to

1. We have followed almost

Tried from Both. Laptop: HP