Hi! I have two WAN connections and I configured the SSL VPN on Cisco RV340 in WAN1, but I would like to find I way if WAN1 is down the ssl vpn connection goes through WAN2 (automatically) and vice and versa. My two WAN connections come from different...
Hello,I would like a help about a configuration, so I have a switch layer 6500 series connected to a firewall, the port configuration between them is layer 2, in another words I do not configure an IP address in the Cisco switch port to conected ...
Jon,First of all thank you for your help. But...1) use a L2 port. So lets say the L2 port is in vlan 10 and the subnet is 192.168.5.0/24 6500 end ======int vlan 10 ip address 192.168.5.1 255.255.255.0 ip route 0.0.0.0 0.0.0.0 192.168.5.2 Firewall in...
Jon,but when a apply a policy on firewall all the other vlans stops to works properly, it did not connect to Internet, just the vlan where the servers stay works and the connection between the firewall and 6500 switch is in this default vlan(server v...