Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hai,I have 8510 WLC and outdoor AP AIR-CAP1552E-M-K9 .I am using the country code SA.All APs are associated to WLC. a/n radio & b/g/n is showing UP.But my AP is registered in Bridge mode. When I put the AP in local mode, Its a/n radio is going do...
Hai,I have a network 3750 stack unit as my coreswitch & another 3750 for server connectivity.I have a 16 cameras and a DVR device which is acting as a controller for camera. All cameras and DVR are in same vlan.I am accessing the DVR device in o...
Dear All,I have a Cisco 6500 with dual sup VS-S720-10G & Switch is not in VSS mode.Version is s72033-advipservicesk9_wan-mz.122-33.SXH7.binI am continously getting the following error%SYS-SPSTBY-3-CPUHOG: Task is running for (2000)msecs, more than (...
Dears,We have a problem with packet loss between two directly connected devices. Devices are Nexus 7009 and ASR 1002. [RTR-ASR-100201 10.88.40.1] <----->[HQ-N7K-1 10.88.40.2] [RTR-ASR-100202 10.88.40.25]<-----> [HQ-N7K-2 10.88.40.26] Any idea what...
Hai, You are absolutely right. Its is Bridge mode or flexconnect modeIn our scenario, we are not using MESH configuration.I have 3 APs(1522) in my networkIf I want to use the outdoor AP with both the antennas (2.4 and 5GHz) for client connectivity, w...
Thanks scott..But when I changed it earlier, a/n radio went down..Was there any reason for that ?What do i need to keep the AP in local mode ? If I change it as RAP, 2.4 & 5 GHZ will work ? ThanksDeva
Dear Scott,Thanks for your reply.>"bridge mode if the 1552 is setup as a RAP is the same as local mode"< What does this means ?My AP is in MAP mode and it has physical connectivity to the switch.. So do i need to change it as RAP ?RegardsDeva
