Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All,By mistake, I have removed the passwords under line con 0 and line vty 0 4.After I signed out I realized that I can't access (telnet). It's always giving me this message " Password required, but none set".As I've also removed the password unde...
Hi All,I need to connect 2 switches (2960 & 2960S) with only one single link in our LAN network. This is to get extra number of ports.Requesting your help with the followings:Please confirm if straight throug cable will work to connect between the ab...
Hi All,I just want to upgrade the ASA version on 5510 from 8.0(4) to 8.2(5)46. I know it might be straight forward, but I need to confim:The current free memory percentage is 43%. Will it be ok?Will the VPN clients work with new version?In case for -...
Thanks John.The password for the console was already configured, and I removed it by the command: no password but I left the login command.So, the current situation is:line con0 loginline vty 0 4 loginCan I still get in with the console?If not, what ...
Ok. Here are the outputs:For SW1:sw1#show vtp statusVTP Version capable : 1 to 3VTP version running : 2VTP Domain Name : drVTP Pruning Mode : DisabledVTP Traps Generation : DisabledDe...
Appreciate your prompt response, and I do agree with youI'll post the outputs. When I goi to the officeMeanwhile, I would request you to please provide some hints about outputs of those commands
Thanks Jon and DerekPlease note the following:- This is the only connection that the new switch has to the network.- The total number of the existing is 2 switches which already connected together with etherchannel that I'm not aware of well.- The ne...
