Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
So I stumbled upon this while reading traffic on our Sonicwall router and noticed that we're dropping about 50 packets per seconds. Is there any way we can disable multicast moh 239.10.16.16 port 2000 on the telephony-service section without affectin...
Greetings!I'm trying to setup an EZVPN connection with our UC560 and a Sonicwall TZ200 router. Is this possible? We're a mostly Sonicwall shop so at the moment we're not looking to change our routers. We are currently running a multisite configurati...
OK so I'm very hesitant to start messing with it after all the issues that were brought to light (thanks David T.). My question is for Cisco: Will there be a patch for all the issues that were recently brought up? Or are updates only released based ...
What's happenin forum?Anyway, I just wanted to share some scripts I managed to get together with the help of others and the interwebz. I manage a large infrastructure of UC520's and UC560's where we have enabled users to dial four digit extensions ...
Please correct me if I'm wrong, but I believe you will need to split the point-to-point private Ethernet at both ends with a switch and hook up one connection to the ASA and another to the UC, on both ends. Also, another thing you might want to consi...
So if I wanted to do this on my UC's, would this be correct?# conf t(config)# ip access-list 111 deny udp any host 239.10.16.16 eq 2000(config)# interface vlan1(config-if)# ip access-group 111 outThanks-Renato
