Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have configured a WEBVPN connection on an 881 but it doesn't want to work correctly. When I go to the webpage and launch the installer it attempts to perform an "Update check" and then eventually fails with the message: "Failed to get configuration...
I am trying to set up NAT/PAT for access to a webserver behind the ASA. (Running 8.4)I have a single Static IP on the outside interface (70.102.23.xxx) and I have a webserver with an IP of 192.168.0.1 and I need to make sure all http requests are se...
I am tyring to find a way for allowing some users connecting via SSL VPN (Anyconnect) to reach a PC on VLAN 2, but not all VPN users.The second VLAN is used for a credit card machine and is set up with a reflexive ACL as below:(Cisco 891)interface Vl...
I cannot get the web portal to work on both Windows 8.1 and 7, using the Anyconnect client version 3.0.However I still connot connect when using the client directly. I get this message from the client:"Connection has timed out. Please verify Internet...
Another update,the machine I have been working with is running windows 8.1I have attempted to connect via a laptop running 7 and it will connect every time, HOWEVER, only if I initiate the connection from the web portal login, and not if I do it from...
Looking at a few examples I notice there is a line from the config not in mine that is as follows:crypto vpn anyconnect flash:/webvpn/anyconnect-win-3.1.04066-k9.pkg sequence 1But it is not a command I am able to input via cli?
For testing purposes to see if it is responding on Port 22 How would I modify the NAT rul to send anything coming in on 39124 to be sent to the Server on port 22?Would it be like this:object network WEB-SERVER-TCP39214 nat (inside,outside) static int...
So it is a issue with the server?I also SSLVPN'd into the network and am not able to ssh into the box from there over 22 or 39124... I should be able to do so from the SSLVPON remote network of 100.100 correct?
