Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Situation/configuration is as follows:
- WLC 2504 (8.1.131) with a total of 22 AP's connected.
- Several WLAN's active each having there own (dynamic) interface
- The (static) management interface has the "enable dynamic AP management" option enabled...
Configuration has now been changed to reflect the setup as previosly described. Everythings now works the way we want it. Everyone thanx for the help/support..
Richard.
Hmm, I am starting to understand how it works. Quick recap, correct me if i am wrong.
The AP start, get's an ip from dhcp. then tryes to find the WLC (broadcast, DHCP 43/60 or DNS) and when found makes contact to find out on which interface it needs...
Currently we point the AP's to the correct controller (we only have one) using Windows DHCP server with the optien 43 active and pointing to the correct WLC. In the configuration of the AP's we have currently nothing hard configured to point to the W...
