Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
My AnyConnect VPN connect to the ASA, however I cannot access my inside network hosts (tried Split Tunnel and it didn't work either). I plan to use a Split Tunnel configuration but I thought I would get this working before I implemented that configur...
I have an ASA 5505 ver 8.4. The configuration is provided below. My INSIDE hosts are able to get to the internet via the Outside interface. The DHCP for my INSIDE hosts are handled by my L3 3560 switch. My DMZ hosts DHCP is handled by the ASA 5505. I...
Jouni,Well pings might not be working from computer to computer, but I setup a VNC server on my Inside network computer and I am able to access via the VPN.Thank you again for all of your assistance.Jerry
Jouni,Well the packet-tracer worked see below.But still Request timed out on my ping attempts from the AnyConnect computer.So I did something I should have done earlier. I installed Wireshark on the PC I am trying to ping.The pings are arriving on t...
Julio,While working on another issue, I had a second set of eyes review the configs in my switches and one of the switches hadn't fully had it's VLAN 20 & 22 information removed, therefore it was causing this issue.Also, becuase I hadn't cleared the ...
Julio,I will look at that tomorrow. Also found some things in the switch to change as well.Open DNS (208.67.222.222) should work just as well as 4.2.2.2 (I can get to the address from the Inside network) but I will try 4.2.2.2 as well.Thanks again, I...
Jouni,Thank you for the catch, I thought I had removed them from the switch when I moved everything for the DMZ to the ASA. That's the problem with long hours and not getting to work on this without interruptions.I'll make those changes tomorrow when...