Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have implemented anyconect VPN with DUO 2FA, however I need to know how I can generate VPN connection and disconnection logs.Has anyone had to perform this type of configuration? If yes, could you share how to do it?
Hi,IOS IPS was configured to only generate alert. During testing it was observed that the IPS was reset in giving connections.log below:*Oct 10 14:30:29: %IPS-6-SEND_TCP_PAK: Sending TCP packet:(X.X.X.X:433)=>(y.y.y.y:63170),tcp flag:0x4, pak:0x21664...
I performed this configuration, but I didn't see any logs being generated or sent to syslog server.Is something missing? ###logging list VPN-USER message 746012logging list VPN-USER message 722051logging list VPN-USER message 746013logging list VPN-U...
HI,
My case different, I have 04 Routers Concentrator DMVPN using config below interface tunnel:
ROUTER A
interface Tunnel1566 ip vrf forwarding vpn-A ip address 10.150.10.1 255.255.255.0 no ip redirects no ip proxy-arp ip mtu 1400 ip nhrp map mult...
But it will make the warnings go away, right?but still see the reset command sh ip ips statics.It seems the problem is in the subsystem of the feature.I used up the hidden command on the router, but not solved the problem.csdb tcp reassembly max-que...
Hello Julio,Yes, just follow the request of the TAC, have BUG ID number ID : CSCty10906The strange thing is that IPS does not match the signature effects, making it impossible to identify the event.Regards Rodolfo Navero
Hi,The high consumption of CPU is not of concern, since there is no drop packets.I had the same problem after performing POC Cisco, we conclude that the high CPU consumption that relate to using this topology.In my case several vlan ID used to separa...
